简体 | 繁體 | FastenerExpo |

Click Specification

Round Head Short Square Neck Bolts,(Inch Series) [Table3] (A307, SAE J429, F468, F593)

ASME B 18.5 - 2012 (2017)

Display drawing:

美标ASME B18.5 - 2012 (2017) ASME18.5 18.5 Round Head Short Square Neck Bolts,(Inch Series) [Table3] (A307, SAE J429, F468, F593)
Thread Size
d
1/4 5/16 3/8 7/16 1/2 5/8 3/4
d
PP UNC
ds max
min
dk max
min
k max
min
s max
min
k1 max
min
0.2500 0.3125 0.3750 0.4375 0.5000 0.6250 0.7500
20 18 16 14 13 11 10
0.260 0.324 0.388 0.452 0.515 0.642 0.768
0.213 0.272 0.329 0.385 0.444 0.559 0.678
0.594 0.719 0.844 0.969 1.094 1.344 1.594
0.563 0.688 0.782 0.907 1.032 1.219 1.469
0.145 0.176 0.208 0.239 0.270 0.344 0.406
0.125 0.156 0.188 0.219 0.250 0.313 0.375
0.260 0.324 0.388 0.452 0.515 0.642 0.768
0.245 0.307 0.368 0.431 0.492 0.616 0.741
0.124 0.124 0.156 0.156 0.156 0.218 0.218
0.093 0.093 0.125 0.125 0.125 0.187 0.187
①,Minimum Thread Length:
The minimum length of thread shall be equal to twice the basic bolt diameter plus 0.25 in. for nominal bolt lengths of 6 in. or shorter, and twice the basic bolt diameter plus 0.50 in. for longer nominal lengths.
Bolts of nominal lengths too short to accommodate the minimum thread lengths shall be threaded full length. The length from the head or neck to the first complete (full form) thread shall not exceed the length of 2-1/2 threads for sizes up to and including 1 in., and 3-1/2 threads for sizes over 1 in.