简体 | 繁體 | FastenerExpo |

Grooved Pins-Full-Length Parallel Grooved, With Chamfer

ISO 8740 - 1997

Display drawing:

国际ISO 8740 - 1997 ISO8740 8740ISO Grooved Pins-Full-Length Parallel Grooved, With Chamfer
Nominal Diameter
d
Φ1.5 Φ2 Φ2.5 Φ3 Φ4 Φ5 Φ6 Φ8 Φ10 Φ12 Φ16 Φ20 Φ25
d max
min
d1 min
max
c2
c
c1
Minimum Double Shear,kN
L
1.5 2 2.5 3 4 5 6 8 10 12 16 20 25
1.475 1.975 2.475 2.975 3.925 4.925 5.925 7.91 9.91 11.89 15.89 19.87 24.87
1.6 2.15 2.6 3.15 4.2 5.2 6.25 8.25 10.3 12.25 16.3 20.4 25.4
1.65 2.2 2.7 3.25 4.3 5.3 6.35 8.35 10.4 12.45 16.5 20.6 25.6
0.12 0.18 0.25 0.3 0.4 0.5 0.6 0.8 1 1.2 1.6 2 2.5
0.6 0.8 1 1.2 1.4 1.7 2.1 2.6 3 3.8 4.6 6 7.5
0.2 0.25 0.3 0.4 0.5 0.63 0.8 1 1.2 1.6 2 2.5 3
1.6 2.84 4.4 6.4 11.3 17.6 25.4 45.2 70.4 101.8 181 283 444
8~20 8~30 10~30 10~40 10~60 14~60 14~80 14~100 14~100 18~100 22~100 26~100 26~100
①,The grooving angle "a" applies only to grooved pins made from steel (a≈70°). The grooving angle may be modified depending on resilience of material.
②,r ≈ d

Similar Standards

1 Metric grooved pins—half-length centre grooved [ASME/ANSI]
ASME/ANSI B 18.8.100M - 2000 (R2005)
Metric grooved pins—half-length centre grooved
2 Grooved Pins - Half-Length Centre Grooved [EN ISO]
EN ISO 8743 - 1997
Grooved Pins - Half-Length Centre Grooved
3 Grooved Pins-Full-Length Parallel Grooved, With Pilot [ISO]
ISO 8739 - 1997
Grooved Pins-Full-Length Parallel Grooved, With Pilot
4 Metric grooved pins, full-length parallel grooved-metric series [ASME/ANSI]
ASME/ANSI B 18.8.100M - 2000 (R2005)
Metric grooved pins, full-length parallel grooved-metric series
5 Grooved pin, full length parallel grooved with pilot [DIN]
DIN 1470 - 1978
Grooved pin, full length parallel grooved with pilot
6 Grooved pins - Type F [ASME]
ASME B 18.8.2 - 2000 (R2010)
Grooved pins - Type F
7 Grooved Pin, Full Length Parallel Grooved With Pilot [DIN EN ISO]
DIN EN ISO 8739 - 1998
Grooved Pin, Full Length Parallel Grooved With Pilot
8 Grooved Pins - Type E [ASME]
ASME B 18.8.2 - 2020
Grooved Pins - Type E
9 Grooved Pins -- Half-Length Centre Grooved [DIN EN ISO]
DIN EN ISO 8743 - 1998
Grooved Pins -- Half-Length Centre Grooved
10 Grooved Pins - Type H [ASME]
ASME B 18.8.2 - 2000 (R2010)
Grooved Pins - Type H
11 Grooved Pins, Half Length Grooved With Gorge [DIN]
DIN 1469 - 2012
Grooved Pins, Half Length Grooved With Gorge
12 Grooved Pins. Full-Length Parallel Grooved,With Chamfer [DIN EN ISO]
DIN EN ISO 8740 - 1998
Grooved Pins. Full-Length Parallel Grooved,With Chamfer
13 Grooved pins, Half length grooved with gorge [DIN]
DIN 1469 - 2011
Grooved pins, Half length grooved with gorge
14 Grooved Pins - Type E [ASME]
ASME B 18.8.2 - 2000 (R2010)
Grooved Pins - Type E
15 Grooved Pins - Type G [ASME]
ASME B 18.8.2 - 2020
Grooved Pins - Type G
16 Grooved Pins-One-Third-Length Centre Grooved [ISO]
ISO 8742 - 1997
Grooved Pins-One-Third-Length Centre Grooved
17 Grooved pins metric series with half-length grooved [ASME/ANSI]
ASME/ANSI B 18.8.100M - 2000 (R2005)
Grooved pins metric series with half-length grooved
18 Grooved pins - Type F [ASME]
ASME B 18.8.2 - 2020
Grooved pins - Type F
19 Grooved Pins, Full Length Parallel Grooved With Chamfer [DIN]
DIN 1473 - 1978
Grooved Pins, Full Length Parallel Grooved With Chamfer
20 Grooved Pins, Half Length Grooved With Gorge [DIN]
DIN 1469 - 1978
Grooved Pins, Half Length Grooved With Gorge
21 Grooved Pins - Type H [ASME]
ASME B 18.8.2 - 2020
Grooved Pins - Type H
22 Grooved Pins-Half-Length Centre Grooved [ISO]
ISO 8743 - 1997
Grooved Pins-Half-Length Centre Grooved
23 Grooved Pins - Half-Length Centre Grooved [EN]
EN 28743 - 1992
Grooved Pins - Half-Length Centre Grooved
24 Grooved Pins - Type G [ASME]
ASME B 18.8.2 - 2000 (R2010)
Grooved Pins - Type G
25 Metric grooved pins with one third length groove in the middle [ASME/ANSI]
ASME/ANSI B 18.8.100M - 2000 (R2005)
Metric grooved pins with one third length groove in the middle
26 Grooved Pins - 1/3 Length Centre Grooved [DIN EN ISO]
DIN EN ISO 8742 - 1998
Grooved Pins - 1/3 Length Centre Grooved
27 Grooved pins - 1/3 Length Centre Grooved [DIN]
DIN 1475 - 1978
Grooved pins - 1/3 Length Centre Grooved
28 Grooved Pins - Half-Length Centre Grooved [GB]
GB /T 13829.4 - 2004
Grooved Pins - Half-Length Centre Grooved
29 Grooved Pin, Full Length Parallel Grooved With Chamfer [GB]
GB /T 13829.2 - 2004
Grooved Pin, Full Length Parallel Grooved With Chamfer
30 Grooved Pins - Half-Length Centre Grooved [GB]
GB /T 13829.1 (D) - 1992
Grooved Pins - Half-Length Centre Grooved
31 Grooved Pin, Full Length Parallel Grooved With Pilot [GB]
GB /T 13829.1 - 2004
Grooved Pin, Full Length Parallel Grooved With Pilot
32 Grooved Pins. Half Length Centre Grooved [NF]
NF E 25-750 - 1997
Grooved Pins. Half Length Centre Grooved
33 Grooved pin, full length parallel grooved with pilot [GB]
GB /T 13829.1 (A) - 1992
Grooved pin, full length parallel grooved with pilot
34 Grooved Pins. Full Length Paralled Grooved, With Chamfer [NF]
NF E 25-772 - 1997 (R2002)
Grooved Pins. Full Length Paralled Grooved, With Chamfer
35 Grooved pins-One-third-length centre grooved [GB]
GB /T 13829.3 - 2004
Grooved pins-One-third-length centre grooved
36 Grooved Pins-Full-Length Parallel Grooved, With Chamferw [GB]
GB /T 13829.1 (B) - 1992
Grooved Pins-Full-Length Parallel Grooved, With Chamferw
37 Grooved Pins. One-Third-Length Centre Grooved [NF]
NF E 25-763 - 1997 (R2002)
Grooved Pins. One-Third-Length Centre Grooved
38 Grooved Pins — Full-length Parallel Grooved, With Pilot [NF]
NF E 25-761 - 1997
Grooved Pins — Full-length Parallel Grooved, With Pilot
39 Grooved Pins-One-Third-Length Centre Grooved [GB]
GB /T 13829.1 (C) - 1992
Grooved Pins-One-Third-Length Centre Grooved
40 Grooved Straight Pins - Type C [SAE]
SAE J 494 (C) - 2004
Grooved Straight Pins - Type C
41 Grooved Straight Pins - Type E [SAE]
SAE J 494 (E) - 2004
Grooved Straight Pins - Type E
42 Grooved Straight Pins - Type F [SAE]
SAE J 494 (F) - 2004
Grooved Straight Pins - Type F