Home Standards Products Tradeshows Suppliers Magazines Media Partners

Categories

+ Bolts & Studs
+ Nuts
+ Screws
+ Pins
+ Rivets
+ Welds
+ Tools
+ Anchors
+ Rings, Bushes, Fittings, Collars
+ Clamps，Rigging

Add Filter Clear All

Thread Position

External Internal Internal&External

Thread Type

Metric [M] UNC/UNF/UNEF/UNR/UNRC/UNRF/UNS/... BSW/BSF/Whit.S/Whit. MJ Self-Tapping Cutting/Locking Wood Metic pressue-tight joints threads [ZM] [Mc] [Mp] Pipe threads with 55° angle [G] Pipe threads with 55° angle [R] [Rc] [Rp] [R1] Trapezoidal [Tr]

Internal Driving

External Driving

Locking Type

Shank

Point Clear

Washers

Plain Washers for Assemblies Split Lockwashers for Assemblies Toothed lock Washers for Assemblies

Others

Right & Left Thread

Narrow by:

Flat Pointx
Previous
1 2 3 4 5 6 7 8 9 10
Next
114-deg Countersunk Square Neck Bolts,(Inch Series) [Table 8] ANSI/ASME B 18.5 - 2012
114-deg Countersunk Square Neck Bolts,(Inch Series) [Table 8] 114° Countersunk square neck bolts ANSI/ASME B 18.5 - 2008
114° Countersunk square neck bolts 120°Cross recessed raised countersunk screws GB 974 - 1976
120°Cross recessed raised countersunk screws 120°Flat Countersunk Head Short Square Neck Bolts CNS 4419 - 1981
120°Flat Countersunk Head Short Square Neck Bolts 24° Cone Connectors - Union Cross GB /T 3746 - 2008
24° Cone Connectors - Union Cross 80° Cross recessed raised countersunk head screws ANSI/ASME B 18.6.3 - 2010
80° Cross recessed raised countersunk head screws 80° Square Recessed Countersunk Head Screws ANSI/ASME B 18.6.3 - 2010
80° Square Recessed Countersunk Head Screws

1

 82° Flat Coutersunk Trim head Screws [Table 13] ASME B 18.6.3 - 2013
82° Flat Coutersunk Trim head Screws [Table 13] 82° Cross Recessed Countersunk Head Screws ASME B 18.6.3 - 2013
82° Cross Recessed Countersunk Head Screws 82° Slotted Flat Countersunk Head Machine Screws [Table 1] ASME B 18.6.3 - 2013
82° Slotted Flat Countersunk Head Machine Screws [Table 1] 82° Slotted Flat Coutersunk Head Tapping Screws [Table 1] ASME B 18.6.3 - 2013
82° Slotted Flat Coutersunk Head Tapping Screws [Table 1] 82° Slotted Oval Countersunk Head Machine Screws [Table 7] ASME B 18.6.3 - 2013
82° Slotted Oval Countersunk Head Machine Screws [Table 7] 82° Slotted Undercut 82-deg Flat Countersunk Head Tapping Screws [Table 9] ASME B 18.6.3 - 2013
82° Slotted Undercut 82-deg Flat Countersunk Head Tapping Screws [Table 9] 82° Slotted Undercut Oval Countersunk Head Machine Screws [table 11] ASME B 18.6.3 - 2013
82° Slotted Undercut Oval Countersunk Head Machine Screws [table 11] Aerospace - Bolts, Normal Spline Head, Normal or Pitch Diameter Shank, Long Length MJ Threads, Metallic Material, Coated or Uncoated, Strength Classes Less Than or Equal to 1100 MPa ISO 9254 - 2008
Aerospace - Bolts, Normal Spline Head, Normal or Pitch Diameter Shank, Long Length MJ Threads, Metallic Material, Coated or Uncoated, Strength Classes Less Than or Equal to 1100 MPa Aerospace - Bolts, Normal Spline Head, Normal Shank, Short or Medium Length MJ Threads, Metallic Material, Coated or Uncoated, Strength Classes Less Than or Equal to 1100 MPa ISO 9255 - 2008
Aerospace - Bolts, Normal Spline Head, Normal Shank, Short or Medium Length MJ Threads, Metallic Material, Coated or Uncoated, Strength Classes Less Than or Equal to 1100 MPa Aerospace Series-Bolts, Hexagon Head, Relieved Shank, Long Thread, In Heat Resisting Steel FE-PA92HT (A286), Silver Plated-Classification: 900 MPa (At Ambient Temperature)/650℃ EN 3007 - 1996
Aerospace Series-Bolts, Hexagon Head, Relieved Shank, Long Thread, In Heat Resisting Steel FE-PA92HT (A286), Silver Plated-Classification: 900 MPa (At Ambient Temperature)/650℃ Aerospace Series-Bolts, Hexagon Head, Relieved Shank, Long Thread, In Heat Resisting Steel FE-PA92HT (A286), Silver Plated-Classification: 900 MPa (At Ambient Temperature)/650℃ EN 3006 - 1994
Aerospace Series-Bolts, Hexagon Head, Relieved Shank, Long Thread, In Heat Resisting Steel FE-PA92HT (A286), Silver Plated-Classification: 900 MPa (At Ambient Temperature)/650℃ Aerospace Series-Bolts, Hexagon Head, Relieved Shank, Long Thread, In Heat Resisting Steel FE-PA92HT (A286), Silver Plated-Classification: 900 MPa (At Ambient Temperature)/650℃ DIN EN 3007 - 1996
Aerospace Series-Bolts, Hexagon Head, Relieved Shank, Long Thread, In Heat Resisting Steel FE-PA92HT (A286), Silver Plated-Classification: 900 MPa (At Ambient Temperature)/650℃ Aerospace Series-Bolts, Hexagon Head, Relieved Shank,long Thread, In Heat Resisting Nickel Base Alloy NI-P100HT (Inconel 718)-Classification: 1275 MPa (At Ambient Temperature)/650°C EN 3008 - 1998
Aerospace Series-Bolts, Hexagon Head, Relieved Shank,long Thread, In Heat Resisting Nickel Base Alloy NI-P100HT (Inconel 718)-Classification: 1275 MPa (At Ambient Temperature)/650°C Aerospace Series-Bolts, Hexagon Head, Relieved Shank,Long Thread, In Heat Resisting Nickel Base Alloy NI-P100HT (Inconel 718)-Classification: 1275 MPa (At Ambient Temperature)/650°C EN 3009 - 1998
Aerospace Series-Bolts, Hexagon Head, Relieved Shank,Long Thread, In Heat Resisting Nickel Base Alloy NI-P100HT (Inconel 718)-Classification: 1275 MPa (At Ambient Temperature)/650°C Aerospace Series-Screws 100° Countersunk Normal Head, Offset Cruciform Recess, Coarse Tolerance Normal Shank, Medium Length Thread, In Alloy Steel, Cadmium Plated - 1100 MPa (At Ambient Temperature)/235 °C EN 4162 - 2016
Aerospace Series-Screws 100° Countersunk Normal Head, Offset Cruciform Recess, Coarse Tolerance Normal Shank, Medium Length Thread, In Alloy Steel, Cadmium Plated - 1100 MPa (At Ambient Temperature)/235 °C Aerospace Series-Screws 100° Countersunk Normal Head, Offset Cruciform Recess, Coarse Tolerance Normal Shank, Medium Length Thread, In Alloy Steel, Cadmium Plated - 1100 MPa (At Ambient Temperature)/235 °C EN 4162 - 2009
Aerospace Series-Screws 100° Countersunk Normal Head, Offset Cruciform Recess, Coarse Tolerance Normal Shank, Medium Length Thread, In Alloy Steel, Cadmium Plated - 1100 MPa (At Ambient Temperature)/235 °C Aerospace Series-Screws, Hexagon Head, Relieved Shank, Long Thread, In Heat Resisting Steel FE-PA92HT (A286), Classification: 900 MPa (at Ambient Temperature)/650℃ DIN EN 3006 - 1994
Aerospace Series-Screws, Hexagon Head, Relieved Shank, Long Thread, In Heat Resisting Steel FE-PA92HT (A286), Classification: 900 MPa (at Ambient Temperature)/650℃ Aerospace; Bihexagonal Head Bolts, Close Tolerance, With Mj-thread, Short Thread Length, In Titanium Alloy; Nominal Tensile Strength 1100 Mpa, For Temperatures Up To 315 °c DIN 65438 - 1993
Aerospace; Bihexagonal Head Bolts, Close Tolerance, With Mj-thread, Short Thread Length, In Titanium Alloy; Nominal Tensile Strength 1100 Mpa, For Temperatures Up To 315 °c Aerospace; cheese head bolts, with internal serration and MJ-thread, short thread, titanium alloy DIN 65517 - 2002
Aerospace; cheese head bolts, with internal serration and MJ-thread, short thread, titanium alloy Agricultural Equipment; Countersunk Double-nip Bolts, Sinkings, Metric Thread, Finish DIN 11014 - 1968
Agricultural Equipment; Countersunk Double-nip Bolts, Sinkings, Metric Thread, Finish Agricultural Machinery - Flat Countersunk Square Neck Bolts With Short Square DIN 11015 - 1995
Agricultural Machinery - Flat Countersunk Square Neck Bolts With Short Square Anchor Bolt -A JIS B 1178 - 1994
Anchor Bolt -A Anchor Bolt -B JIS B 1178 - 1994
Anchor Bolt -B Anchor Bolt -C JIS B 1178 - 1994
Anchor Bolt -C Anchor Bolt -D JIS B 1178 - 1994
Anchor Bolt -D Arc Stud Welding - Partially Threaded Stud - Type PD ISO 13918 (PD) - 2017
Arc Stud Welding - Partially Threaded Stud - Type PD Askew Head Bolts ASME B 18.2.1 - 2012
Askew Head Bolts Askew Head Bolts ASME B 18.2.1 - 2010
Askew Head Bolts Automotive Parts - Type 1A Taper Screw Plug JIS D 2101 (1A) - 2001
Automotive Parts - Type 1A Taper Screw Plug Automotive Parts - Type 1B1 Taper Screw Plug JIS D 2101 (1B1) - 2001
Automotive Parts - Type 1B1 Taper Screw Plug Automotive Parts - Type 1B2 Taper Screw Plug JIS D 2101 (1B2) - 2001
Automotive Parts - Type 1B2 Taper Screw Plug Automotive Parts - Type 1C Taper Screw Plug JIS D 2101 (1C) - 2001
Automotive Parts - Type 1C Taper Screw Plug Automotive Parts - Type 2A Screw Plug JIS D 2101 (2A) - 2001
Automotive Parts - Type 2A Screw Plug Automotive Parts - Type 2B Screw Plug JIS D 2101 (2B) - 2001
Automotive Parts - Type 2B Screw Plug Automotive Parts - Type 2C Screw Plug JIS D 2101 (2C) - 2001
Automotive Parts - Type 2C Screw Plug Belt screws，Continuous Mechanical Handling Equipment; Seating Screws And Cupped Washers For The Attachment Of Components To Belts DIN 15237 - 1980
Belt screws，Continuous Mechanical Handling Equipment; Seating Screws And Cupped Washers For The Attachment Of Components To Belts Bihexagonal head bolts with flange ANSI/ASME B 18.2.5M - 2009
Bihexagonal head bolts with flange

1

 Bihexagonal Head Bolts With Flange SAE J 58 - 1998
Bihexagonal Head Bolts With Flange Black Counersunk Square Neck Bolts For Woodwork BS 325 - 1947
Black Counersunk Square Neck Bolts For Woodwork Black Countersunk Square Neck Bolts For Iron BS 325 - 1947
Black Countersunk Square Neck Bolts For Iron Black Cup Aquare Neck Bolts BS 325 - 1947
Black Cup Aquare Neck Bolts Black Cup Nibbed Bolts For Iron And Steel Work BS 325 - 1947
Black Cup Nibbed Bolts For Iron And Steel Work Black Cup Oval Neck Bolts BS 325 - 1947
Black Cup Oval Neck Bolts Blunt Bolts for General Purpose - Basic Parameters and Dimensions GOST 21249 (-1) - 1996
Blunt Bolts for General Purpose - Basic Parameters and Dimensions Blunt Bolts for General Purpose - Basic Parameters and Dimensions GOST 21249 (-2) - 1996
Blunt Bolts for General Purpose - Basic Parameters and Dimensions Bolt, Hexagonal Head, For Tensile Application, ISO Thread-4g Class NF L 22-145 - 1985
Bolt, Hexagonal Head, For Tensile Application, ISO Thread-4g Class Bolts and Screws for T-slots DIN 787 - 2005
Bolts and Screws for T-slots

1

 Bolts And Screws With External Hexalobular Driving Feature With Small Flange DIN 34800 - 2000
Bolts And Screws With External Hexalobular Driving Feature With Small Flange Bolts For T-Slot GB 37 - 1988
Bolts For T-Slot

4

 Bolts of Turnbuckle for Building - Double Ended Stud [Carbon Steel products] JIS A 5542 (3) - 2003
Bolts of Turnbuckle for Building - Double Ended Stud [Carbon Steel products] Bolts of Turnbuckle for Building - Eyebolt [Carbon Steel products] JIS A 5542 (2B) - 2003
Bolts of Turnbuckle for Building - Eyebolt [Carbon Steel products] Bolts of Turnbuckle for Building - Eyebolt [Carbon Steel products] JIS A 5542 (2A) - 2003
Bolts of Turnbuckle for Building - Eyebolt [Carbon Steel products] Bolts of Turnbuckle for Building - Stainless Steel Strap Bolt JIS A 5542 (4) - 2003
Bolts of Turnbuckle for Building - Stainless Steel Strap Bolt
Previous
1 2 3 4 5 6 7 8 9 10
Next
About Us | Terms of Use | FAQ | Contact Us © Copyright 2009-2020 GlobalFastener.com All Right Reserved. 浙ICP备11055130号-12 浙公网安备33010602003202号