IFI 114 - 2003
100 deg and 120 deg countersunk head style break mandrel blind rivets IFI 119 - 2003
100 Deg And 120 Deg Countersunk Headstyle Structural Flush Break Pull Mandrel Self-Plugging Blind Rivets

1

IFI 114 - 1986
100 Deg And 120 Deg Flust Head Style Break Mandrel Blind Rivets IFI 134 - 2003
100 Deg Countersunk Head Multi-Grip Flush Break Pull Mandrel Self-Plugging Blind Rivets

1

IFI 117 - 2003
100 Deg Countersunk Head Pull Through Mandrel Blind Rivets

1

IFI 130 - 2003
100 Deg Countersunk Head Structural Splitting Self-Plugging Pull Mandrel Blind Rivets

1

ANSI/ASME B 18.30.1M - 2000 (R2005)
100° and 120° Countersunk Head Style Break Mandrel Blind Rivets (Metric series) ANSI/ASME B 18.5 - 2012
114-deg Countersunk Square Neck Bolts,(Inch Series) [Table 8] (A307, SAE J429, F468, F593) ANSI/ASME B 18.5 - 2008
114° Countersunk square neck bolts IFI 126 - 2003
120 Deg Countersunk Head Style Break Mandrel Closed End Blind Rivets

1

GB 12617 - 1990
120 Deg Flush Head Break Mandrel Blind Rivets

3

GB 12616 - 1990
120 Deg Flush Head Break Mandrel Closed And Blind Rivets

3

GB 874 - 1986
120 Degree Countersunk Head Semi-Tubular Rivets

2

ANSI/ASME B 18.7 - 2001
120 degree countersunk head semi-tubular rivets GB 954 - 1986
120° Degree Countersunk Head Rivets SAE J 492 - 1968
120°Countersunk Head Semitubular Rivets CNS 4419 - 1981
120°Flat Countersunk Head Short Square Neck Bolts GB /T 17880.4 - 1999
120°small Countersunk Head Riveted Nuts

2

YJT 3003
120°small countersunk internal and external half hex rivet nuts

2

BS 3575 - 1963
150 Degree Countersunk Head Semi-Tubular Rivets For Break Pad ANSI/ASME B 18.7 - 2001
150 degree flat countersunk head semi-tubular rivets ANSI/ASME B 18.6.3 - 2010
80° Machine Screw and Tapping Screw Nuts (Inch Seires) ANSI/ASME B 18.6.3 - 2010
80° Machine Screw and Tapping Screw Nuts (Inch Seires) ANSI/ASME B 18.6.3 - 2010
80° Slotted flat countersunk head machine screws ANSI/ASME B 18.6.3 - 2010
80° Square Recessed Countersunk Head Screws

1

ASME B 18.6.3 - 2013
82° Flat Coutersunk Trim head Screws [Table 13] (ASTM F837 / F468) ASME B 18.6.3 - 2013
82° Cross Recessed Countersunk Head Screws [Table 2] (ASTM F837, F468) ASME B 18.6.3 - 2013
82° Slotted Flat Countersunk Head Machine Screws [Table 1] (ASTM F837 / F468) ASME B 18.6.3 - 2013
82° Slotted Flat Coutersunk Head Tapping Screws [Table 1] GB /T 17880.2 - 1999
90° Countersunk Head Riveted Nuts

2

GB /T 17880.3 - 1999
90° Small Countersunk Head Riveted Nuts

2

SAE J 492 - 1968
90°Countersunk Head Semitubular Rivets DIN 18182-2 (R/G) - 2010
Accessories For Use With Gypsum Plasterboards - Nails DIN 18182-4 - 1987
Accessories For Use With Gypsum Plasterboards; Nails EN 4162 - 2016
Aerospace Series-Screws 100° Countersunk Normal Head, Offset Cruciform Recess, Coarse Tolerance Normal Shank, Medium Length Thread, In Alloy Steel, Cadmium Plated - 1100 MPa (At Ambient Temperature)/235 °C EN 4162 - 2009
Aerospace Series-Screws 100° Countersunk Normal Head, Offset Cruciform Recess, Coarse Tolerance Normal Shank, Medium Length Thread, In Alloy Steel, Cadmium Plated - 1100 MPa (At Ambient Temperature)/235 °C DIN 11014 - 1968
Agricultural Equipment; Countersunk Double-nip Bolts, Sinkings, Metric Thread, Finish DIN 15237 - 1980
Belt screws，Continuous Mechanical Handling Equipment; Seating Screws And Cupped Washers For The Attachment Of Components To Belts BS 325 - 1947
Black Counersunk Square Neck Bolts For Woodwork BS 325 - 1947
Black Countersunk Nibbed Bolts BS 325 - 1947
Black Countersunk Square Neck Bolts For Iron DIN 7337 (B) - 1991
Break manderl blind rivets ，countersunk head

2

WS 9130 - 2014
Chipboard screws - Countsunk Head with TX and Full Thread WS 9145 - 2014
Chipboard screws - Countsunk Head with TX and Part Thread WS 9146 - 2014
Chipboard screws - Countsunk Head with TX and Part Thread ANSI/ASME B 18.6.3 - 2010
Close Tolerance 100 Degree Slotted Countersunk Head Screws ISO 15974 - 2000
Closed End Blind Rivets With Break Pull Mandrel And Countersunk Head - AIA/St

2

NF E 25-711 - 2001
Closed End Blind Rivets With Break Pull Mandrel And Countersunk Head - AIA/St DIN EN ISO 15974 - 2001
Closed End Blind Rivets With Break Pull Mandrel And Countersunk Head - AIA/St GB /T 12616.4 - 2004
Closed End Blind Rivets With Break Pull Mandrel And Countersunk Head--property Class 51

2

GB /T 12616.1 - 2004
Closed End Blind Rivets With Break Pull Mandrel And Countersunk Head-Property Class 11

2

YJT 9001
Concrete screws ANSI/ASME B 18.5 - 2012
Countersunk Bolts and Slotted Countersunk Bolts [Table7] (A307, SAE J429, F468, F593) ANSI/ASME B 18.5 - 2008
Countersunk Bolts and Slotted Countersunk Bolts,(Inch Series) CNS 4697 - 1982
Countersunk Bolts With Double Nips CNS 4698 - 1982
Countersunk Double-Rib Bolts DIN EN ISO 7046 (-1) - 2011
Countersunk Flat Head Screws (Common Head Style) with Type H or Type Z Cross Recess - Product Grade A - Part 1: Steel Screws of Property Class 4.8

5

GB /T 819.1 - 2016
Countersunk Flat Head Screws With Cross Recess—Part 1: Property Class 4.8

5

GB /T 819.2 - 2016
Countersunk Flat Head Screws With Cross Recess—Part 2: Property Class 8.8, Stainless Steel Screws And Non-ferrous Metal Screws

5

ISO 7046-2 - 2011
Countersunk Flat Head Screws(Common Head Style) With Type H Or Type Z Cross Recess-Product Grade A-Property Class 8.8

1