Home >> News >> New Product & Technology >> New Seco Ceramic Inserts, Cutter Bodies Maximize HRSA Machining
New Product & Technology
New Seco Ceramic Inserts, Cutter Bodies Maximize HRSA Machining
Pubdate:2017-12-25   Source:Industry News  

CS300 Ceramic Inserts offer flank wear resistance at cutting speeds ranging from 1,970 – 3,940 ft per min and enable feeds from 0.002 – 0.006 in. per tooth. Cutter bodies are available in R220.26 and R217.26 models and feature internal air coolant channels.

Seco Tools now offers Secomax™ CS300 ceramic inserts and cutter bodies to boost productivity in milling and turning operations with heavy interrupted cuts on nickel-based heat-resistant superalloys (HRSA). The new cutters increase productivity by up to eight times over standard carbide milling and are ideal for machining a wide range of components for aerospace and power generation turbine segments.

CS300 inserts are SiAlON-type ceramics that offer high notch wear resistance, toughness and thermal shock resistance. The inserts provide optimum flank wear resistance at higher cutting speeds ranging from 1,970 – 3,940 feet (600 – 1,200 meters) per minute and enable feeds from 0.002 – 0.006 inches (0.05 – 0.15 mm) per tooth. Combined, these attributes reduce machining cost per workpiece, increase output and lower energy consumption.

The new R220.26 and R217.26 cutter bodies are hardened and nickel-coated for high reliability, reduced chip friction and better resistance to high temperatures. Wedge clamps provide more secure insert locking and feature internal air coolant channels that ensure optimum chip evacuation and heat control. The metric range includes cutter bodies with RP 1204 inserts for facing and pocketing in diameters from 32 to 50 mm. Cutters with RN 1207 and RN 1204 inserts for facing are available in diameters from 32 to 125 mm. The imperial range includes diameters 2.0", 2.5" and 3.0".


Declaration:
1. All the articles published in this site is just for information spreading and also with detailed source names and authors. Please contact us(email: media@globalfastener.com) if the source media or authors refuse,we will delete it ASAP.
2.GlobalFastener.com shall not be liable for errors or delays in the content,or for any actions taken in reliance thereon.
Related Article