Home > Material
X2CrNiN23-4
Standard EN 10296-2-2005 Welded circular steel tubes for mechanical and general engineering purposes — Technical delivery conditions — Part 2 Stainless steel
Standard EN 10253-4-2003 Butt-welding pipe fittings. Wrought austenitic and austenitic-ferritic (duplex) stainless steels with specific inspection requirements
Standard ISO TS 15510-2003 TECHNICAL SPECIFICATION Stainless steels-Chemical composition
Standard EN 10088-3-2005 Stainless steels--Part 3:Techincal delivery conditions for semi-finished products,bar,rods and sections for general purposes
Standard ISO 9327(-5)-1999 Steel forgings and rolled or forged bars for pressure purposes-Technical delivery conditions-Part 5:Stainless steels
Standard EN 10088-3-2014 Stainless steels-Part 3: Technical delivery condition for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
Standard ISO 15510-2014 TECHNICAL SPECIFICATION Stainless steels-Chemical composition
Standard ISO 9328-7-2018 Steel flat products for pressure purposes - Technical delivery conditions - Stainless steels
Standard DIN EN 10088-3-2014 Stainless steels – Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
Standard NF EN 10088-2-2005 Part2:Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes
Standard NF EN 10088-1-2005 Stainless steels — Part 1: List of stainless steels
Standard NF EN 10028-7-2008 Flat products made of steels for pressure purposes - Part 7 : stainless steels
Standard NF EN 10296-2-2005 Welded circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2 : stainless steel tubes
Standard NF EN 10028-7-2000 Flat products made of steels for pressure purposes Part 7: Stainless steels


Chemical Composition(%)


Standard Material Designation Chemical Composition (%)
EN 10296-2-2005
Welded circular steel tubes for mechanical and general engineering purposes — Technical delivery conditions — Part 2 Stainless steel
1.4362
(X2CrNiN23-4)
 
Min
Max
EN 10253-4-2003
Butt-welding pipe fittings. Wrought austenitic and austenitic-ferritic (duplex) stainless steels with specific inspection requirements
1.4362
(X2CrNiN23-4)
 
Min
Max
ISO TS 15510-2003
TECHNICAL SPECIFICATION Stainless steels-Chemical composition
X2CrNiN23-4
 
Min
Max
EN 10088-3-2005
Stainless steels--Part 3:Techincal delivery conditions for semi-finished products,bar,rods and sections for general purposes
X2CrNiN23-4
(1.4362)
 
Min
Max
ISO 9327(-5)-1999
Steel forgings and rolled or forged bars for pressure purposes-Technical delivery conditions-Part 5:Stainless steels
X2CrNiN23-4
 
Min
Max
ISO 9328-7-2018
Steel flat products for pressure purposes - Technical delivery conditions - Stainless steels
X2CrNiN23-4
 
Min
Max
EN 10088-3-2014
Stainless steels-Part 3: Technical delivery condition for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
X2CrNiN23-4
(1.4362)
 
Min
Max
DIN EN 10088-3-2014
Stainless steels – Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
X2CrNiN23-4
(1.4362)
 
Min
Max
ISO 15510-2014
TECHNICAL SPECIFICATION Stainless steels-Chemical composition
X2CrNiN23-4
(4362-323-04-I)
 
Min
Max
NF EN 10088-2-2005
Part2:Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes
X2CrNiN23-4
(1.4362)
 
Min
Max
NF EN 10088-1-2005
Stainless steels — Part 1: List of stainless steels
X2CrNiN23-4
(1.4362)
 
Min
Max
NF EN 10028-7-2008
Flat products made of steels for pressure purposes - Part 7 : stainless steels
X2CrNiN23-4
(1.4362)
 
Min
Max
NF EN 10028-7-2000
Flat products made of steels for pressure purposes Part 7: Stainless steels
X2CrNiN23-4
(1.4362)
 
Min
Max
NF EN 10296-2-2005
Welded circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2 : stainless steel tubes
X2CrNiN23-4
(1.4362)
 
Min
Max
For Reference Only