EN 10296-2-2005 Welded circular steel tubes for mechanical and general engineering purposes — Technical delivery conditions — Part 2 Stainless steel
|
1.4307
(X2CrNi18-9)
|
|
EN 10253-4-2003 Butt-welding pipe fittings. Wrought austenitic and austenitic-ferritic (duplex) stainless steels with specific inspection requirements
|
1.4307
(X2CrNi18-9)
|
|
EN 10263-5-2001 teel rod, bars and wire for cold heading and cold extrusion - Part 5: Technical delivery conditions for stainless steels
|
1.4307
(X2CrNi18-9)
|
|
ISO TS 15510-2003 TECHNICAL SPECIFICATION Stainless steels-Chemical composition
|
X2CrNi18-9
|
|
EN 10269-2006 Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties
|
X2CrNi18-9
(1.4307)
|
|
DIN EN 10263-5-2018 Steel rod, bars and wire for cold heading and cold extrusion - Part 5: Technical delivery conditions for stainless steels
|
X2CrNi18-9
(1.4307)
|
|
ISO 9328-7-2018 Steel flat products for pressure purposes - Technical delivery conditions - Stainless steels
|
X2CrNi18-9
|
|
ISO 683-18-2014 Bright steel products
|
X2CrNi18-9
(4307-304-03-1)
|
|
ISO 15510-2014 TECHNICAL SPECIFICATION Stainless steels-Chemical composition
|
X2CrNi18-9
(4307-304-03-I)
|
|
ISO 4954-2018 Steels for cold heading and cold extruding
|
X2CrNi18-9
(4307-304-03-I)
|
|
NF EN 10269-1999
|
X2CrNi18-9
(1.4307)
|
|
NF EN 10088-2-2005 Part2:Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes
|
X2CrNi18-9
(1.4307)
|
|
NF EN 10088-1-2005 Stainless steels — Part 1: List of stainless steels
|
X2CrNi18-9
(1.4307)
|
|
NF EN 10028-7-2008 Flat products made of steels for pressure purposes - Part 7 : stainless steels
|
X2CrNi18-9
(1.4307)
|
|
NF EN 10028-7-2000 Flat products made of steels for pressure purposes Part 7: Stainless steels
|
X2CrNi18-9
(1.4307)
|
|
NF EN 10296-2-2005 Welded circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2 : stainless steel tubes
|
X2CrNi18-9
(1.4307)
|
|
EN 10263-5-2017 Steel rod, bars and wire for cold heading and cold extrusion - Part 5: Technical delivery conditions for stainless steels
|
X2CrNi18-9
(1.4307)
|
|