Home > Material
1.4301
Standard EN 10088-1-2005 Staehle Stainless steels. Part 1:List of stainless steels
Standard EN 10296-2-2005 Welded circular steel tubes for mechanical and general engineering purposes — Technical delivery conditions — Part 2 Stainless steel
Standard EN 10253-4-2003 Butt-welding pipe fittings. Wrought austenitic and austenitic-ferritic (duplex) stainless steels with specific inspection requirements
Standard EN 10269-2006 Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties
Standard EN 10250-4-1999
Standard EN 10088-2-2005
Standard DIN 17440-1972 Stainless steel quality standards
Standard EN 10088-3-2005 Stainless steels--Part 3:Techincal delivery conditions for semi-finished products,bar,rods and sections for general purposes
Standard EN 10269-2013 Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties
Standard EN 10088-3-2014 Stainless steels-Part 3: Technical delivery condition for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
Standard NF EN 10269-1999
Standard DIN EN 10263-5-2018 Steel rod, bars and wire for cold heading and cold extrusion - Part 5: Technical delivery conditions for stainless steels
Standard DIN EN 10269-2014 Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties
Standard DIN EN 10088-3-2014 Stainless steels – Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
Standard DIN EN 10270-3-2012 Steel wire for mechanical springs – Part 3: Stainless spring steel wire
Standard DIN 17442-1977 Rolled, Wrought or Cast Stainless Steel Products for Medical Instruments
Standard NF EN 10088-2-2005 Part2:Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes
Standard NF EN 10088-1-2005 Stainless steels — Part 1: List of stainless steels
Standard NF EN 10028-7-2008 Flat products made of steels for pressure purposes - Part 7 : stainless steels
Standard NF EN 10296-2-2005 Welded circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2 : stainless steel tubes
Standard NF EN 10028-7-2000 Flat products made of steels for pressure purposes Part 7: Stainless steels
Standard EN 10263-5-2017 Steel rod, bars and wire for cold heading and cold extrusion - Part 5: Technical delivery conditions for stainless steels


Chemical Composition(%)


Standard Material Designation Chemical Composition (%)
EN 10088-1-2005
Staehle Stainless steels. Part 1:List of stainless steels
X5CrNi 18-10
(1.4301)
 
Min
Max
EN 10296-2-2005
Welded circular steel tubes for mechanical and general engineering purposes — Technical delivery conditions — Part 2 Stainless steel
X5CrNi18-10
(1.4301)
 
Min
Max
EN 10253-4-2003
Butt-welding pipe fittings. Wrought austenitic and austenitic-ferritic (duplex) stainless steels with specific inspection requirements
X5CrNi18-10
(1.4301)
 
Min
Max
EN 10250-4-1999 X5CrNi 18-10
(1.4301)
 
Min
Max
DIN 17440-1972
Stainless steel quality standards
X5CrNi 18-9
(1.4301)
(X5CrNi 18-10)
 
Min
Max
EN 10088-3-2005
Stainless steels--Part 3:Techincal delivery conditions for semi-finished products,bar,rods and sections for general purposes
X5CrNi18-10
(1.4301)
 
Min
Max
EN 10269-2006
Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties
X5CrNi18-10
(1.4301)
 
Min
Max
EN 10269-2013
Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties
X5CrNi 18-10
(1.4301)
 
Min
Max
DIN EN 10263-5-2018
Steel rod, bars and wire for cold heading and cold extrusion - Part 5: Technical delivery conditions for stainless steels
X5CrNi18-10
(1.4301)
 
Min
Max
DIN EN 10269-2014
Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties
X5CrNi 18-10
(1.4301)
 
Min
Max
EN 10088-3-2014
Stainless steels-Part 3: Technical delivery condition for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
X5CrNi18-10
(1.4301)
 
Min
Max
DIN EN 10088-3-2014
Stainless steels – Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
X5CrNi18-10
(1.4301)
 
Min
Max
DIN EN 10270-3-2012
Steel wire for mechanical springs – Part 3: Stainless spring steel wire
X5CrNi18-10
(1.4301)
 
Min
Max
EN 10088-2-2005 X5CrNi 18-10
(1.4301)
 
Min
Max
NF EN 10269-1999 X5CrNi18-10
(1.4301)
 
Min
Max
NF EN 10088-2-2005
Part2:Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes
X5CrNi18-10
(1.4301)
 
Min
Max
NF EN 10088-1-2005
Stainless steels — Part 1: List of stainless steels
X5CrNi18-10
(1.4301)
 
Min
Max
NF EN 10028-7-2008
Flat products made of steels for pressure purposes - Part 7 : stainless steels
X5CrNi18-10
(1.4301)
 
Min
Max
NF EN 10028-7-2000
Flat products made of steels for pressure purposes Part 7: Stainless steels
X5CrNi18-10
(1.4301)
 
Min
Max
DIN 17442-1977
Rolled, Wrought or Cast Stainless Steel Products for Medical Instruments
X5CrNi18-9
(1.4301)
 
Min
Max
NF EN 10296-2-2005
Welded circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2 : stainless steel tubes
X5CrNi18-10
(1.4301)
 
Min
Max
EN 10263-5-2017
Steel rod, bars and wire for cold heading and cold extrusion - Part 5: Technical delivery conditions for stainless steels
X5CrNi18-10
(1.4301)
 
Min
Max
For Reference Only